Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978

Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978

Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978
We know our products. Always the correct part. A carburetor is a device to mix air and fuel for internal combustion engines in the proper ratio for combustion. The fuel and air mixture is too rich if it has an excess of fuel, while too lean if there is not enough. Therefore, to make sure the proper engine function and have a nice driving experience, a good quality carburetor is highly recommended. (Note:Not fit for chevy 305/327 engine). Material: Heavy Duty. Measurement of Barrel. Choke Air Horn Outer Diameter. Measurement of Base Plate. 93.5mm 50.5mm(Center To Center). Premium Material: The carburetor for Chevrolet was made of high quality Zinc Alloy. Add more horse power while maintaining near stock fuel mileage. Fuel-Efficient & Strong Power:The integrated carburetor kit works excellent in fuel consumption, greatly improving fuel utilization, reducing fuel costs, and saving more energy, thus effectively enhancing the power of the engine. Fast Start & Steady Speed:With strong and stable power, the carburetor also benefits the start of the engine, it helps to steady the speeds and offer sufficient power in speeding up, dramatically improving the engine performance. Fully Tested & Assembled:From the overall structure to every small part, the carburetor has been constructed with high precision, every component is fully tested and adjusted, organically assembled into one powerful carburetor. Made for Performance: Improve engine performance, Low fuel consumption, Start fast stable idle speed, allowsing you to get a better driving experience and maneuverability, allowing you to maintain control on bumpy roads. 1x Car Carburetor for Chevrolet. Accessories: You will get exactly as shown in the picture abve. The oil channels of carburetors will be blocked without cleaning. Please clean up the oil channels and air filters as well as use the clean fuel before installing the carburetors. Please confirm your old part number matches up with one of the part numbers above. Professional installation is highly recommended (No Instruction Included). Even though the carburetor was adjusted to original specifications, please adjust it according to the condition of your engine before installation. 1st at 4:30am. 1st at 5:00am. Other items you might also like. Forged 4340 EN24 H-Beam Connecting Rods for GMC/Chevrolet – LS-Series V8 engine. K04 Turbo for Chevrolet Cobalt HHR Pontiac Solstice GXP 2.0L 122Cu l4 250HP. GT1446 781504 Turbo for Chevy Cruze Sonic Trax/Buick Encore 1.4T EcoTec 55565353. 4x Connecting Rods+Bolts for GMC SGE 1.5 T LFV Chevrolet Malibu Buick Envision. 8x Forged H-Beam Connecting Rods+ARP 8740 Bolts for Chevrolet Small Block 6.125. Turbocharger For Chevrolet GMC W3500 for Isuzu Truck NPR NQR 4HE1XS 8972089663. Turbo GT45 T4 Turbocharger Oil Line for Chevrolet Camaro LS Convertible 2-Door. Titanizing Conrods for Chevrolet Malibu for Buick Envision for GMC SGE 1.5 T LFV. Turbo for Chevy Cruze Sonic Trax for Buick Encore 1.4T Billet Wheel Turbocharger. Turbo charger TD04L for Chevrolet Malibu Camaro Buick Regal Envision 2.0 L. 15X Turbo Oil Kit Intercooler Wastegate Kit for Chevrolet 4.5-6.0L LS1 LS2 LS6. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Carburetors”. The seller is “motorbay” and is located in this country: US. This item can be shipped to United States.
  • Barrel Count: 2
  • Bolt Hole Spacing: 93.5×50.5mm(Center To Center)
  • Brand: BFO
  • Choke Air Horn Outer Diameter: 78mm
  • Choke Type: Electric
  • Compatible Make: for Chevrolet,
  • Features: Automatic Mixture Control
  • Fitment Engine: 5.7L 350Cu Engines, 6.6L 400Cu Engines
  • Fitment Type: Direct Replacement
  • Fits 1: for Chevrolet Engine Models 350/5.7L 1970-1980
  • Fits 2: for Chevrolet Engine Models 400/6.6L 1970-1975
  • Fits 3: For Chevrolet Blazer 1970-1974
  • Fits 4: Carburetor for Rochester Type 2GC 2 Barrel
  • Fits 5: for Chevrolet C10 C20 C30 C50 C60 C70
  • Fits 6: for Chevrolet G10 G20 G30 K10 K20 K30 P10 P20 P30
  • Input Voltage: DC 12V
  • Intake Side Inner Diameter: 42.8mm
  • Interchange Part Number: 17054616,CA-22-3174R,3113
  • Items Included: Gasket, O-Rings
  • Manufacturer Part Number: RXMU86
  • Manufacturer Warranty: 2 Years
  • Material: Zinc Alloy
  • Note: No Instruction Included
  • Notice: This is aftermarket replcement part.
  • OE/OEM Part Number: 17054616,CA-22-3174R,3113
  • Placement on Vehicle: Front
  • Quantity: 1x Car Carburetor for Chevrolet, Mounting gasket & seal included
  • Superseded Part Number: 17054616,CA-22-3174R,3113
  • Type: Carburetor
  • Venturi Diameter: 30mm

Carburetor Carb Fit For Chevrolet P10 P20 P30 For Chevy K5 Blazer 1975-1978

Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L

Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L

Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L
A carburetor is a device to mix air and fuel for internal combustion engines in the proper ratio for combustion. The fuel and air mixture is too rich if it has an excess of fuel, while too lean if there is not enough. To make sure the proper engine function and have a nice driving experience, a good quality carburetor is highly recommended. Product fit: Direct Fit. Material: Heavy duty zinc alloy construction. Aftermarket high performance engine carburetor replacement. High performance electric choke. Improve throttle response for better engine performance. Add 510% horsepower and maintain near stock fuel mileage. Please pay attention to the part # for fitment. Professional installation is highly recommended (No Instruction Included). Direct Fit Application, Check Fitment Chart. Fit for 1981 Toyota Corona. Fit for 1991 Toyota Cressida. Fit for 1984 Toyota 4Runner. It has choke wires with a four-prong square plug. Heavy duty Zinc alloy construction. The “heart” of the engine. The intake pipe between the air filter and the engine of the car. To mix air and gasoline in a correct ratio to ensure function. Automatic Mixture Control, Constant-Vacuum. If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. CARMASUSPENSIONS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. Virgin Islands, Northern Marianas, Guam are not deliverable. Which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. Promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise. Has the right to refuse any replacement requests. For Chevy GMC C1500 C2500 Suburban Tahoe 15Pcs Front Control Arms Sway Bars Kit. Fits Ford F-250 F-350 Super Duty – 4WD 4×4 New 5x Complete Front Suspension Kit. For 1999-06 Chevy + GMC 1500 Trucks 6-Lug 4×4 Complete Front Suspension Kit x13. For Ford Ranger & Explorer 4WD 10Pcs Front Control Arms Ball Joints Tie Rods Kit. For Chevrolet Malibu Pontiac G6 Saturn Aura 8 x Control Arm Sway Bar Tie Rod Kit. Fits 99-04 Ford F-250 F-350 Super Duty 4WD New 4x Tie Rods Adjusting Sleeves Kit. Set of 2 Inner Tie Rod End Part For 90-91 LEXUS ES250 & 87-91 TOYOTA CAMRY. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Carburetors”. The seller is “carmasuspensions” and is located in this country: US. This item can be shipped to United States.
  • Brand: carmasuspension
  • Manufacturer Part Number: CAR16053501S
  • Choke Type: Electric Choke
  • Product Name: Carb Carburetor
  • Part Type: it has choke wires with a four-prong square plug
  • Type: Carb Assembly
  • Material: Heavy duty Zinc alloy construction
  • Color: Silver
  • Fitment Type: Performance/Custom
  • Custom Bundle: No
  • Instructions: Not Included
  • Importance Notice: Profession Installation Require
  • Feature: ESCP
  • Placement: The intake pipe between the air filter and the engine of the car
  • Barrel Count: 2
  • Placement on Vehicle: Front
  • Note: To mix air and gasoline in a correct ratio to ensure function.
  • For: 1981-1995 for Toyota Pickup,1984 for Toyota 4Runner
  • Fits: 1981 for Toyota Coron,1981-1995 for Toyota Pickup
  • Voltage: 12V
  • Features: Automatic Mixture Control,Constant-Vacuum
  • Mounting Flange Type: As the picture
  • Items Included: As the picture
  • Performance Part: Yes
  • Vintage Part: Yes
  • Manufacturer Warranty: 1 Year
  • Interchange Part Number: 21100-75030
  • Superseded Part Number: 21100-75030

Carburetor For 1985-1987 Toyota Pickup Base Standard Cab Pickup 2-Door 2.4L